COZY HOODED BATH TOWEL DIY

Supplies:
-one standard bath towel
-one standard hand towel
-one standard wash cloth
–iron on eyelashes (2.5″)
–iron on alpha
-iron
-cotton cloth for protecting patches when ironing
-sewing machine and thread
-straight pins
-scissors
-embroidery thread to match alpha patches

Fold your hand towel in half to make a square shape. Make sure one of the long sides are even and pin them together. These towels will fit children ages 3-9 depending on their size. If you’re making it for a 3-5 year old, you may want to trim off about 2″ from the long side before pinning together for a more shallow hood.

Stitch your two long sides together where you pinned them. Make sure to back stitch where you start and end and sew about 1/4″ in from the edge. Remove your pins. If you’ve cut the edge, you may want to also add a zig-zag stitch near the edge to help it not fray in the wash.

On the other side of your towel, fold the edge back about 2″ and pin down. This will create a softer edge to the front of the hood. Open your towel up and stitch along the line where the finished seam is folded in. Remove your pins.

Trim off the big seams on the short ends of your towel.

Open up your hand towel (the hood) so that the edges you just cut are lined up and centered on the center of the long edge of your large bath towel. You want the wrong side of your hood (the side with the seams showing) to be facing the large bath towel. Pin things down and stitch from one side of the hood to the other, making sure you stitch about 1/2″ from the edge. Back stitch at the start and finish.

Remove your pins and fold your hood up. Turn your hood right side out so that the first seam you stitched is inside your hood.

Flip the whole thing over so that the hood is still above the body of the towel. You’ll see the new seam that you just stitched. Push it up towards the hood and pin it down so that it’s flat against the hood. Iron if you need to.

Stitch again from one edge of your hood to the other, making sure to stitch along the finished edge of the body of the towel. This will hide the frayed edge of your hood and not leave a big folded seam. Remove your pins and trim your thread ends.

Next we’ll make the hand pockets. Cut your wash cloth in half. With your hooded towel open and the inside of the bath towel facing you, pin one half of the wash cloth to the back side of one of the top corners as shown. You’ll be flipping this right side out in a later step to create the hand pocket. You want to use the finished edge of your wash cloth as the edge of your pocket.

Stitch along the two edges with a slight curve at the corner. Back stitch at the start and stop. Remove your pins and trim off the excess fabric and the corner.

Flip that pocket to the front and push out the rounded corner. Pin down the two edges of the finished part of the wash cloth and just stitch about 1/2″ worth in each corner to secure things. Remove pins.

Place your iron-on patches or letters so that they’re centered on the hood and follow manufacturer’s directions for ironing on. You may want to place a cloth between some patches. My eyelashes didn’t need stitching reinforcement, but the alpha letters did. I just added black embroidery thread to a 3″ embroidery needle and stitched from the inside of the hood so that I stitched through the black part of my patches. I added about 6-8 stitches per letter and knotted it on the inside to make it as inconspicuous as possible. You could also try using your sewing machine to stitch through them.

Courtesy by: http://abeautifulmess.com/